Canoo Inc. (NASDAQ:GOEV) held its Q3 2023 earnings call, providing updates on its manufacturing milestones, revenue generation, and capital allocation plans. The company reported $519,000 in revenue, a negative gross margin of $384,000, and plans to ramp up manufacturing volumes in the upcoming quarters.
Key takeaways from the call include:
- Canoo achieved a 20,000 unit run rate for its battery modular line and robotics and assembly line.
- The company is in its revenue generation phase, with sales from vehicle deliveries and Defense Innovation Unit contracts.
- Canoo raised approximately $250 million in total capital this year, with $78 million from equity-linked securities and a $45 million investment from a foreign strategic partner.
- The company expects to reach profitability around 14,000 to 16,000 units and has revised its adjusted EBITDA guidance to negative $85 million to negative $105 million for the second half of 2023.
- Canoo aims to invest $200 million in capital to reach a 40,000-unit production capacity by the end of 2024.
During the call, Canoo's Tony Aquila emphasized the importance of rigorous testing and validation in the development of their unique products. He also highlighted the company's focus on commercial customers before expanding into consumer markets.
Greg Ethridge discussed the company's revenue generation phase, mentioning significant orders from commercial and government customers, including partnerships with NASA and the U.S. Army. He also noted the company's successful capital-raising efforts and efficient allocation of funds.
Ramesh Murthy reported that Canoo generated approximately $519,000 in revenue in Q3 2023, incurred $903,000 in cost of revenues, and had a negative gross margin of $384,000. The negative margin was primarily due to custom-built initial vehicle deliveries and increased logistics costs.
Aquila further discussed the company's manufacturing process and capacity, mentioning that the MPP1 high-tech areas are fully automated and operated by less than 22 people, with the capacity to scale to 50,000 units per year. He emphasized the importance of exiting 2024 with a 40,000-unit run rate and the company's plans to invest an additional $200 million in capital to reach this goal.
Canoo remains focused on efficiently allocating capital and achieving their business plan objectives. The company plans to raise small amounts of capital frequently and become less wasteful, with a focus on perfecting the automation process to increase margins and minimize capital usage. The company also introduced a more ecological material for the industry, indicating a commitment to sustainability.
InvestingPro Insights
In light of InvestingPro's real-time data and tips, it's important to note some key insights about Canoo Inc. Firstly, the company's market cap sits at 194.18M USD, indicating its size in the current market. Moreover, the price to earnings (P/E) ratio stands at -0.29, suggesting a negative earnings scenario. Furthermore, the P/E ratio adjusted for the last twelve months as of Q2 2023 is -0.58, reinforcing the company's current financial struggle.
InvestingPro Tips highlight several critical points about Canoo. The company may have trouble making interest payments on its debt and is quickly burning through cash, which aligns with the reported negative gross margin. Additionally, Canoo's stockholders have been receiving poor returns on book equity, and the company operates with a poor return on assets, as evidenced by the -78.19% return on assets for the last twelve months as of Q2 2023.
These insights are crucial for understanding Canoo's current financial situation and future prospects. For those interested in more detailed analysis and tips, InvestingPro provides an extensive list of over 17 additional insights for Canoo and other companies.
Full transcript - GOEV Q3 2023:
Operator: Greetings and welcome to the Canoo Third Quarter 2023 Earnings Call. At this time all participants are in a listen-only mode. A brief question-and-answer session will follow the formal presentation. [Operator Instructions] As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Kunal Bhalla, Senior Vice President, Capital Markets, Corporate Development, and Purchasing. Thank you. Please go ahead.
Kunal Bhalla: Thank you, everyone, for joining us on our Q3 2023 earnings call. We're excited to be presenting this call from our Oklahoma City facility. During the call, Tony will update you on our business progress; Greg Ethridge, who joined as our CFO in August, having previously served on our Board, will provide an introduction and update on sales and financing. And finally, Ramesh will go over the Q3 financial results. Please be advised, we may make forward-looking statements based on current expectations. These are subject to significant risks and uncertainties, and our actual results may differ materially. For a discussion of factors that could affect our future financial results and business, please refer to the disclosure in today's earnings release and on our most recent form 10-Q and 10-K and other reports that we may file with the SEC, including Form 8-K. All of our statements are made as of today and are based on information currently available to us. Except as required by law, we assume no obligation to update any such statements. During this call, we'll discuss non-GAAP financial measures. You can find the reconciliation of these non-GAAP financial measures to GAAP financial measures in today's earnings release, which can be found on the IR section of our website. Over to you, Tony.
Tony Aquila: Thanks, Kunal, and welcome, everyone. We live in the most interesting times with an imperative for global innovation, but with macro and micro headwinds compounded by financial crosswinds, especially in certain industries and markets like ours. When our country has fallen behind, while this is daunting at times, this can feel like forever, but it can and will pass. Based on your creativity to resolve, and determination to find a way to get your vision and mission to market and then to scale. What is inspiring to me is that, it takes just a small group of innovators and hardworking believers who accept nothing other than to find a way to win. What is also inspiring to me, as our country has always done its most impactful work when the world has decided to give us number two or number three or even last place at times to only see us emerge back in the game and many times on top. To be amongst these great innovators, you must find your own inner resolve to lead and not to follow others, but rather hold the bar so high that at times you even doubt yourself, because as we have all seen many people vote against the innovators versus support them. I am blessed and honored to have a group of like-minded people who volunteer every day, do their part and more so that we can accomplish our mission. While times are tough, we are grateful that every day, more and more of you are becoming believers in our strategy that we introduced two plus years ago when we took over the direction and leadership of Canoo. Our vision was bold, not the easiest to understand, and was hyper-focused on different and, as we now know, emerging markets that require unique products, sub-products, and approaches to first meet the needs of our customers in fleet, government, and military, and then on to consumer markets. Some have asked me why not focus on consumers first? It's simple. If you design your products and service for the most discerning commercial customers who aim to test the bounds of the possible, they will help you find a way to build it into reality through rigorous testing and value-based feedback because their business and mission have a critical dependence on our platform to perform in volume and under stress. Not only are our fleet customers contracted multi-year volume buyers with bankable credit profiles and are those who demand minimalism with maximum functionality and safety, these partners can help you fast-forward generations of continuous improvement, which will ultimately benefit our consumer customers when we increase and expand our delivery to these additional markets. The risk of manufacturing before rigorous testing has been blown out by the best, you run the risk of costly recalls. Because of this, we have never just tested our products to pass a regulatory standard, but rather to live or die by the validation of our hardworking people of our country and our customers who rely on our product for critical processes. The big bets we have made around the redesign and functionality of our platform are beginning to play out successfully at multiple levels. But we still have things to prove. We have worked nearly three years to get to this point. We have de-risked the business plan, de-risked the technology, and settled legacy matters. And we'll continue blocking and tackling with our characteristic of scrappiness, perseverance, and tenacity, and the discipline and experience we will gain at a time like this is great for Canoo's future DNA. Look, as I mentioned, there have been substantial headwinds for Canoo and the whole EV market over the last 12 months. Headwinds will slow down any aircraft, but if engineered properly and if determined, it will complete its mission. Now, let me update you on our manufacturing progress in the quarter. We are proud to be a creative and adaptive team and continue to find innovative ways to acquire long lead time capital intensive and environmentally sensitive items. With the market in distress, the team has opportunistically and accretively added manufacturing assets at reduced prices. We are continuing to grow our presence in Oklahoma, and by the end of Q4 2023, target 20% to 25% of our total workforce will be Oklahomans. In our workforce development program with the Cherokee Nation, we began hiring and training employees at our Oklahoma facilities. Yesterday, we reached a key milestone and announced that we would be delivering our first batch of made in Oklahoma electric vehicles to the state of Oklahoma Office of Management and Enterprise Services under an agreement to sell up to 1,000 vehicles. Our manufacturing milestones achieved this quarter are: on July 27th we hit a 20,000 unit run rate for our battery modular line installed in prior Oklahoma and the Cherokee Nation; July 31st 20,000 unit run rate for our robotics and assembly line for our ladder frame equipment installed at Oklahoma City; August 17th, EPA permit granted for our OKC facility; November 10th, commissioning of equipment completed on both the ladder frame system in Oklahoma City and the battery module system in Pryor; November 14th, today we update the general assembly system is on track to achieve the 20,000 unit run rate for Q1 2024. Listen, we believe it's essential for us to be disciplined when stepping our way into volume manufacturing with the right pace of investment and with our supply chain partners. Now I'd like to have Greg cover sales and capital markets activities and then after that we can go to Ramesh.
Greg Ethridge: Thank you, Tony. Just a quick intro. I've had the privilege of serving on the Canoo Board of Directors since December 2020 until recently, when Tony asked me to join the management team full time and put my skills to use for this next phase of growth. Prior to that, I spent 14 years investing and managing direct private and public control investments, often serving as an interim financial manager role. And prior to that, I spent 10 years in investment banking, working in capital markets and restructuring. From my first days of meeting Canoo in mid-2020 and understanding the unique benefits of the modular platform and the technology stack, I had a strong belief in the substantial business opportunity for the company. My conviction about the company's success became stronger after getting to know Tony and the team here and witnessing the business model pivot that he directed in early 2022. For those of you that don't remember, the pivot was the change from a consumer-facing electric vehicle to the fleet-focused electric delivery vehicles that have now generated $750 million in committed orders or 18,000 units for key commercial customers and also large additional opportunities with government customers. This business model shift turned out to be prescient, given the difficulties of consumer exposure in a high interest rate environment. The news focused towards well-funded, high credit quality commercial government and military customers appears to be well timed. Now shifting to our revenue and sales pipeline and recent milestones. During the third quarter, we entered the revenue generating phase for the company. Sales during the quarter were generated from vehicle deliveries, but also from revenue from the DOD's, Defense Innovation Unit Contract and Services. As you know, our multi-purpose platform, or MPP, and many of the underlying technologies, electric drive unit, battery modules, and the system itself offer revenue generating potential for more than just complete vehicle sales. We will continue delivering additional vehicles throughout the balance of the year to our highly discerning, high-grade, credit, government, and commercial fleet customers, the types of customers you want, especially during tough market cycles. On July 12th, Canoo delivered the Crew Transportation Vehicles, or CTV, a derivative of the lifestyle vehicle models to NASA. These specially configured CTVs will transport astronauts to the launch pad at Florida's Kennedy Space Center for future Artemis missions. It was an historic day for our company and a very proud day for our team. On October 20th, Canoo was pleased to attend when NASA officially revealed the CTVs at the Formula 1 Grand Prix in Austin, Texas. On November 10th, we revealed the American Bulldog, a derivative of the Screaming Eagle that was delivered to the U.S. Army and been in constant testing since November of 2022. The Bulldog was developed as a further derivative and byproduct of this extensive testing. And again, as Tony mentioned, we announced yesterday, November 13, that we are delivering our first vehicles in an up to 1,000 unit agreement to the Oklahoma Office of Management and Enterprise Services. We are very proud of our partnership with the state of Oklahoma and its workforce. On our sales pipeline -- our sales pipeline continuous to build through 2025 with continuing -- sorry, we had a little technical glitch here. Continuing order book, growth and pricing stability across our target segments. The team recently concluded pre-launch trials with key customers on our LDV 130, LDV 190, and other derivative products. $3 billion plus order book across both Stage 2 and Stage 3 orders, over 67,000 total reservation count. 3% sequential growth in the quarter on Stage 2 and Stage 3 orders, strong product acceptance on the commercial fleet side allows us to be more discerning on customer choice and modulate order acceptance given our very strong backlog. Through pilot and pre-delivery customer testing, we found 97% to 100% of the use cases are satisfied when looking at the last two years of driving evaluations and deliveries with key fleet customers. Six unique duty cycles including high volume, high traffic metros, rural areas across both food deliveries and general merchandise. 150 plus days of reliable performance in extreme high temperature conditions in multiple weather environments. And over 10,000 industrial and commercial use miles and many thousand deliveries made to unique locations. As we move into production, we also expect to start receiving deposits from our commercial fleet customers. At Canoo, as Tony described, we have been hyper-focused on delivering units to our customers and optimizing across our business. We have a strong track record of raising small amounts of capital and allocating it to different functional areas and using milestone-based achievements. During the quarter we raised $78 million in equity linked securities and in October we raised another $45 million. Year-to-date we have successfully raised approximately $250 million in total capital to support the growth of Canoo. The most recent $45 million convertible preferred investments that closed in October was from a foreign strategic partner that has ability to significantly upside its investment as we continue to achieve our milestones. This long-term investor is interested in a manufacturing partnership with Canoo and can support Canoo at very attractive price points for certain parts of the vehicle. We continue to be focused on a variety of other capital alternatives, including with additional overseas partners. Our primary focus this quarter and going forward will be to efficiently allocate capital and continue to achieve our business plan. We are generating savings that can be redeployed into business at many levels. We continue to be focused on getting maximum efficiency from our capital, and that is my mission. We will take advantage of market dislocations as the opportunities arrive, and Ramesh will describe those in more detail. In summary, despite a very challenging market backdrop this year, we have successfully raised capital to achieve our objectives and will continue to do so. Our team is scrappy, innovative, and persevere. We will continue to optimize our spend and take advantage of the opportunities in front of us to achieve our business plan objectives. I will now hand it over to Ramesh to review the financial results.
Ramesh Murthy: Thank you, Greg. Now let me walk you through the results of Q3 2023. It was an exciting and historic quarter for two reasons. First, we are now a revenue generating company. As Tony mentioned earlier, our first revenues were generated in July when we delivered our first three NASA vehicles on time, followed by revenues generated from the completion of certain engineering milestones and delivery of certain battery modules to the Department of Defense's -- Defense Innovation Unit. We generated revenues of approximately $519,000 in Q3 of 2023. Our revenues in the third quarter reflect the inflection point we are at, beginning the phased ramp manufacturing approach in delivering low volume vehicles starting Q4 of 2023. We expect to ramp volumes over the rest of 2023 and 2024 at a measured pace to match with the delivery schedules that are being agreed to with our customers. We incurred $903,000 in cost of revenues during the three months ended September 30, 2023. Our cost of revenues primarily includes vehicle components and parts, labor costs, and amortized tooling and capitalized costs involved in producing and assembly of our parts and components. Our negative gross margin of 384,000 during the three months ended September 30th, 2023 was primarily due to the custom-built initial vehicle deliveries to NASA and certain increased logistics and freight costs. And includes a lower of cost of net realizable value or LCNRV adjustment of approximately $366,000. We expect negative gross margin to improve on a per vehicle basis as we increase overall production levels and achieve commercial cost savings on material and labor costs. Second, our continuous optimization of operating expenses and narrowed focus on our milestones has resulted in the lowest adjusted negative EBITDA since we have been as a public company. Moving to the income statement. Our third quarter 2023 results are as follows: Research and development expenses totaled $22 million for the quarter compared to $57.1 million in the prior year period, a 61% reduction from Q3 of 2022. SG&A expense was $24.9 million for the quarter compared to $48.8 million in the prior year period. A 49% reduction from Q3 of 2022. GAAP net loss was $112 million for the quarter, compared to gap net loss of $117.7 million in the prior year period. Adjusted EBITDA was negative $40.4 million for the quarter, compared to negative $80.8 million in the prior year period. Adjusted EPS was negative $0.07 per share for the quarter compared to adjusted EPS of negative $0.31 per share in the prior year period. Turning to cash flow. We ended the quarter with $8.3 million of cash and cash equivalents. After giving effect to the issuance, sale and delivery of preferred shares and warrants, for a total of $45 million, our cash balance would have been $53.3 million. Cash used in operations for the nine months ended September 30th, 2023 was $191.4 million, compared $329.9 million in the prior year period. Our capital expenditures of $45.4 million for the nine months ended September 30, 2023 compared to $88.8 million for the nine months ended September 30, 2023. Net cash provided by financing activities for the nine months ended September 30, 2023 was $208.9 million compared to net cash provided by financing activities for the nine months ended September 30, 2022 of $181.3 million. Our monthly cash flows in Q3 of 2023 was approximately 40% lower than our average cash flow per month in 2022. We continue to optimize cash as we move into Q4 of 2023. Moving to our guidance. We had previously provided our guidance for the second half of the year as follows. Adjusted EBITDA of negative $120 million to negative $140 million and CapEx of $70 million to $100 million dollars. Our relentless focus and discipline of expense management, including the labor arbitrage as a result of change in labor mix from engineering to manufacturing and transition of our workforce to Oklahoma and our deliberate strategy to minimize long-term purchase commitments amongst other factors allow us to improve our negative adjusted EBITDA guidance. This improvement has resulted in our revised negative adjusted EBITDA guidance to now be between $85 million to $105 million for the second half of 2023, which is a 30% improvement from the guidance we have shared in the prior quarter. From a CapEx perspective, our phased ramp manufacturing approach allows us to fully utilize our low-volume tools prior to switching over to the high-volume tools and pace our asset expansion to align with production, thereby avoiding higher amortization over initial units produced. These reasons, combined with the other reasons Greg mentioned above, as it relates to partnering with others in the industry to acquire minimally used equipment at optimized cost allows us to reduce our guidance. Thereby we share the following revised guidance for the second half of 2023 of CapEx being $30 million to $40 million. Our 2023 second half adjusted EBITDA guidance of negative $85 million to negative $105 million will bring our full year adjusted EBITDA guidance to negative $210 million to negative $235 million, which is approximately a 50% reduction from the prior year. Now, let me turn it back to Tony for final remarks.
Tony Aquila: Before we go to Q&A, I want to take this time to thank all of our supporters, and especially the Canoo team and our partner suppliers for their incredible flexibility and support while we navigate our way through to the next phase. Operator, please take us to questions.
Operator: Thank you. And ladies and gentlemen, at this time we will conduct our question-and-answer session. [Operator Instructions] Our first question comes from Stephen Gengaro with Stifel. Please state your question.
Stephen Gengaro: Thanks. Good afternoon, everybody. I think two things for me. The first, and this ties into your CapEx guidance and on the second quarter call, you kind of reduced your CapEx needs to get to that 20,000-unit annual run rate. I'm just curious on the progress as far as the efficiency of getting to that 20,000-unit run rate. And does the reduced CapEx that you announced today change the time frame on that?
Tony Aquila: No. Actually, we've actually enhanced our processes such that we're taking advantage of opportunity to buy some of the equipment from the unfortunate situation for others. In addition to that, we've developed manual processes so that we actually can scale above and beyond because you do have some bumps and alignments that you have to do as you bring the line to full automation. So we feel the best we've ever felt. And if by chance you happen to be in the Oklahoma City area, we'd be happy to give you a tour.
Stephen Gengaro: Thanks, I will definitely take you up on that. The other thing for me was when we think about, and I know you probably don't want to give me precise numbers, but when we think about sort of the move toward gross margin positive, can you give us sort of your updated thoughts on roughly the number of units you think you need to get there?
Tony Aquila: Yes. We start to really come to the profitability kind of breakeven around 14,000 to 16,000 units, depending on the manual processes and the automation we've implemented. We democratized the scaling of the manufacturing environment so we can scale it with orders, so we don't have to frontload the CapEx. That's what we fine-tuned and we've developed repair and assembly methods through AI and others so we can train the workforce. And of course, we have great incentive programs for the workforce between the Cherokee Nation and the state of Oklahoma. So we feel good about the 14,000 units. There's more that we'll unveil as to why we concentrated on the 14,000- to 20,000-unit range, but we'll do that at a later date.
Stephen Gengaro: Great. Thanks for the info. I’ll get back in line here.
Operator: Thank you. Our next question comes from H.C. Wainwright, Amit Dayal with H.C. Wainwright. Please state your question.
Amit Dayal: Good afternoon, everyone. Tony, just honing in on the delivery schedule for 2024. Can you give us a sense of how this will ramp from a number of units perspective? Is it in the 10s to 20s in, say, January, February and then ramping into the 50s and 100s later in the year? Any sort of directional?
Tony Aquila: Yes. So good to hear your voice. So first of all, everybody has produced the hockey stick logic system in the way they're going to do manufacturing. We're assuming reality that second like 2% of the time if we studied [indiscernible] And what you'll see is us stepping from -- and that's why we developed the dual method path while we're bringing on CapEx so we're not front-loading is we have manual methods as well as semi-manual methods as well as full automated. The high-tech areas of the MPP1 are fully automated now, and it's less than 22 people that run that entire line, which can do scale to 50,000 units a year. And that capacity is locked and that process is refined and we've developed for training AI. But what you'll see, as we do announce it in the coming quarter, 1 seat, we're delivering vehicles and that is scaling. But it will not be a hockey stick event throughout the year because it is imperative that when we exit 2024, that we're exiting it leaning towards, if you just look at our order book, for the 40,000-unit run rate. And I extend to you the same invitation to come visit us and I'll walk you through how we've done it. You've been to many factories. I think you'll find it pretty interesting what we've done and how we democratized some of these things that generally have been heavy CapEx loads.
Amit Dayal: I'll take you up on that. So when we are now thinking about the delivery schedule for these customers, were there certain expectations, say, from the likes of Walmart (NYSE:WMT), et cetera, of how many units they might have received, say, in 2024 and how that has changed? Are they still working with you in terms of managing expectations around units to be delivered to them?
Tony Aquila: Yes. First of all, when we had the privilege of working with a company like Walmart and its leadership team, they understand logistics and scaling better, I believe, better than anyone, especially in a very demanding manner in which customer delivery on location and as well as bring it to me. So they've been super awesome about how we've worked through this. And what we've done with our customers is we talk to them about a level of accuracy of delivery in years one, a different level in year two and a different level in year three because all our customers are multiyear orders. And so we have a minimum that we have, 80% to 98% confidence at and a higher end that we can reach. If and we decide to choose to accelerate some of the CapEx needs, of course, that gives us an opportunity for the customers to participate in giving us advances in order to do that. So we're finally hitting that stage again. Rather than try to talk everybody through it, for those that it's appropriate for, we'd be willing to give you a tour because now you can really see it.
Amit Dayal: Okay. Thank you, Tony. Just one last one for me. In terms of the strategic investor you mentioned earlier on the call, any color on who this entity is and if they are looking to potentially partner with you on the manufacturing side? Is that for outside of the U.S.?
Tony Aquila: It's a very strong American ally and it's people I've done business with before. And there's a lot of trust. They have an incredible amount of capabilities but they have large funds for the workforce development, which could give us even more competitive advantage. Most of all, they have invested an incredible amount of money in rapid development methods around 3D printing of highly sophisticated parts for various several use cases. But at this time, for many reasons, based on the work we're doing, that name is being kept confident.
Amit Dayal: All right. Thank you, Tony. That’s all I have. Thank you.
Operator: Our next question comes from Jaime Perez with R.F. Lafferty. Please state your question.
Jamie Perez: Hey, good day, everybody. I hope everybody is doing well. Congratulations on your manufacturing. Now are you going to be producing LDVs? And also I know you mentioned your new vehicle, the Pitbull, [pit dog] (ph), sorry. Are you going to be producing that? It's on your website. Are you just going to take reservations for it? Could you give me a little bit of color on the trajectory of that?
Tony Aquila: So yes. So one, being a Georgia boy, you definitely have the right to come here and drive the heck out of it and see what we put behind it. But yes, so it's the same MPP1 platform. It's -- you'll see when you come out and see the tour. You'll see how we built these -- the MPP1, the ladder frames and how their durability compares to others. It's designed for military and industrial use before consumer use, everything down to the wells, to the coatings. We don't use e-coat. We used a much more advanced process that gives you a much longer life. So we'll be able to produce because the MPP1 is just top hat. And if you look at the top hat, the front of our vehicle is reusable. So we're using between 65% and 80% of the parts spend so we can build 130s, 190s LV [indiscernible] We'll be building various units on the same line because it's a multiline-capable system. So that's one of the reasons why we're debugging it the way we are is because, one, we may build a Bulldog. The next one, it maybe a 190 since we have large volume customers who are able to do adequate runs on the vehicle. But to answer your question, in 2024, which will optimize our cash flow from the highest-grade credit customers, we'll be concentrating on the LDVs with limited LV to high-volume customers.
Jamie Perez: Got it. My next question. Are you still getting any issue with the supplies? I mean, I know the labor strike, the UAW labor strike, some of the suppliers had a little bit of a backlog. Are you seeing that or do you anticipate that?
Tony Aquila: Yes, I think our problems are probably a little different, Jamie, in the sense that a lot of our problems are kind of legacy negotiations where they were promising much more accelerated -- the typical 100,000, 150,000 unit orders for pricing. We've actually taken, as Ramesh said, a very different approach and worked into partnership with these people because we effectively are running on negative days of -- on deliveries because we don't build anything unless it's presold and it has a good credit rating. So we're able to kind of recut those deals, and that's why I gave a special shout out because, I mean, I think not only are the supplier partners happy to find somebody who's not trying to ring them out for the next $0.10, but to actually get rewarded as we do volume. So our pricing continues to get better but that we address our BOM costs at a much more moderate level and at a more hybrid of automation and manual versus all fully automated. So as those lines come up, our margins improve dramatically.
Jamie Perez: All right. That’s all the questions I have. Thanks.
Operator: Thanks. [Operator Instructions] Our next question comes from Poe Fratt with Alliance Global Partners (NYSE:GLP).
Charles Fratt: Good afternoon, Tony. Good afternoon, Greg. Can you just talk about your capital raising going forward? It looks like there won't be any more convert debt issue just because the options expired. And then can you just confirm that? And then will that be part of your -- it won't be part of your funding mix going forward? And then will you just talk about the timing on the next $105 million potential of convertible preferred with the same strategic investor?
Tony Aquila: Yes. So that will come from some different sources. So we started generating revenue. I mean, we're real, right? And they're very discerning customers that provided that revenue, and that revenue will grow quarter-over-quarter. We needed to prove these are interesting times, right, as I talked about earlier. So we needed to prove that. So our funding mix now will start to come also from deposits as well as extended terms. And that's why, again, I'll come back to our supplier partners, what they have been willing to do with us. And I think at the strike in hands, the opportunity for them to take a breather and appreciate helping young companies that have tremendous order books that derisks for them. And from a capital perspective, we'll continue to do, whether it's money from me or others, we'll fund the company in a just-in-time and milestone-based progress because I mean, look at it, we're trading below book value right now. So the pendulum always swings, as we all know, extremely. And we just want to prove ourselves and we're long-term investors, those things will come around. So we're feeling good about as we step through 2024 based on the visibility of the macro environment we see, and we see lots of room for us to improve on everything we're giving guidance to today.
Charles Fratt: Can you just clarify? On the last call, you were talking about the potential for nondilutive capital and the term sheets were coming in that might look attractive. When should we expect some less dilutive financing to occur? Meaning are there still terms out there with a certain amount of capital that you can tap into? Or just help me understand sort of the other levers that you can pull.
Tony Aquila: Yes. So I gave you a glimpse into the fact that we're now in an allocation phase and allocation also is connected to deposits, right? And these are sizable in nature approach with our customers. In addition to that, we believe the market is starting to realize our strategy that we announced a long time ago, as I mentioned, and that will obviously help. I always tell the team in terrible markets that are trading below par, it's not about -- it's not just about price of your shares. It's about the volume and liquidity of it. And we have great liquidity and we have a strong base that is growing more towards the long-term side. So we see access to that capital. In addition to that, there are other sources of capital that we are working with that are much lower cost of capital for the various programs that are associated to. And as you win more and more of the big contracts, you get advanced payments associated to those contracts. In addition to that, there is the ability to put in long-term capital PIPEs that aren't interested in selling and other capital areas. We have incentives now starting to flow into -- we'll get our first set of incentives in the first of the year. And when we've got great POs from Grade A credit and BBB credit, our spread, very bankable to get advances on. However, we want to focus on this phase before we pay cost of capital, that we use the strength of the balance sheet of our customers and get them units so they can make money with our units. That makes it all that -- that's a whole vary of ways we would get the capital. But I think when the market is trading like this, you have to raise small amounts in frequency, and it also creates a behavior inside the company where they become less wasteful. When you own companies, it's not a question of how much capital you have on the balance sheet. It's a big question I ask as an investor is what is the efficiency of the dollar invested on the balance sheet. And I can tell you, I've been doing it a long time. In the early phases, as we're all now seeing big amounts on the balance sheet often are connected to big burn rates.
Charles Fratt: Great. And can you just -- so if you do the math, it looks like fourth quarter CapEx is coming in between $30 million and $40 million -- or I'm sorry, roughly $18 million to $28 million for the rest of the year. Can you take a stab at, well, one, I think you've been asked if that's enough to get you to the 20,000-unit production capacity. Is that? And then secondly, how much more capital is going to be required to get you to the 40,000-unit production capacity that it sounds like you're targeting for the end of 2024?
Tony Aquila: Yes. So from a capital perspective, we'll invest about another $200 million. That does not take effect for some of the $0.30 and less on the dollar of some of the stuff we're buying that some front-loaded CapEx before they had customers. So we're in a good phase, plus we really coordinated and again, happy to have a visit and show you the creativity of the way we're using different painting techniques. I come out of a background of that. I sold a company to PPG years back. We understand that market. We don't use e-coat. So our ability to exit at 40,000-unit run rate, which obviously we could accelerate if we put more capital. At this point in time, we don't see a need for that because we've been able to work with our customers because we want to really perfect the process to automation. So obviously, our margins go up and we use the least amount of capital. We see 2024 by the fact that we democratized the way the assembly line goes together, we'll be able to capitalize on a lot of those opportunities. Some of it's luck, some of it's timing. And if you think back to the very beginning when the pivot occurred, it occurred for a very specific reason. You got to build your business for a down market because they're not always up. And that's something we concentrated on. I don't think you'll find anyone that has been able to democratize it to make money in the 14,000, 16,000 unit range. And like I said, in a couple of quarters, we'll explain to you why we did that.
Charles Fratt: Great. Thanks for your time.
Tony Aquila: Thanks for your question
Operator: Our next question comes from Stephen Gengaro with Stifel. Please state your question.
Stephen Gengaro: Thanks. Just a quick follow-up. When you look at the change in EBITDA guidance for the year and sort of the improvement, what are the biggest factors that are driving the delta between where you were and where you are now?
Tony Aquila: So it's been -- our team has renegotiated a lot of deals with our suppliers. They've been huge contributors. In addition to that, we've seen a reduction in our CapEx. We've also been able to utilize better labor arbitrage between California, if you will, and Oklahoma. I mean, for all those that have businesses, I strongly encourage them to look at the state of Oklahoma. It's an amazing workforce and it's got a lot of upside in it. Cost of living is great. So we're picking it up from -- like think of it like when you're reading out the water all funnels down to the center and -- but it's coming from all places.
Stephen Gengaro: Okay. Great. And that was all from me. Thank you.
Operator: And there are no further questions at this time. I'll hand the floor back to management for closing remarks.
Tony Aquila: Again, we'd like to thank everybody. A big shout out to our believers and investors, those that have supported us with instruments that continue to work with us on our equipment needs, the shocking system of introducing a democratized assembly line build-out, and a big shout out to some of our partners that helped us bring the material that is much more ecological to the industry for the first time. And for those of you that come and visit us, you'll see what that is. Thank you.
Operator: Thank you. And that concludes today's call. All parties may disconnect. Have a good evening.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.