Get 40% Off
🤯 This Tech Portfolio is up 29% YTD! Join Now to Get April’s Top PicksGet The Picks – Just 99 USD

More Oil, Fewer U.S. Rigs: Hey Saudis, Something to See Here

Published 07/06/2023, 06:41 pm
Updated 02/09/2020, 04:05 pm
  • U.S. drillers have the potential to double oil output from existing wells, thanks to new drilling efficiencies and innovations such as shale well refracturing
  • Higher drilling efficiency is driving U.S. oil production to new highs while the rig count has decreased, indicating the industry's ability to do more with fewer rigs
  • However, the current political climate poses a challenge to the widespread adoption of refracturing in the U.S. oil industry.

Amid all the anticipation on how many barrels Saudi Arabia will be cutting next month and beyond, a revelation about new drilling efficiencies in U.S. shale surfaced last week — and disappeared almost as quickly.

For those who heard or read ExxonMobil CEO Darren Woods’ comments at the Bernstein Strategic Decisions conference on Thursday, the bet about U.S. drillers having the potential to double output from just existing wells must have sounded as something borderline incredible or incredulous.

Since the fracking boom first caught the Saudis unawares nearly a decade ago with an oil glut they had not witnessed before, evolution in shale had produced wonder after wonder year after year — until the pandemic.

The epic demand destruction and bankruptcy filings in the industry that followed naturally slowed, if not killed, innovation as U.S. production was allowed to plummet from an all-time high of more than 13 million barrels daily to below 10 million at one point. American oil companies went from “Drill Baby, Drill!” to “Dividend Baby, Dividend!” as capex excesses gave way to extraordinary fiscal discipline in a determination to return cash to shareholders (and buy back shares, of course).

More than three years after the pandemic drove a barrel of the West Texas Intermediate crude benchmark to minus $40, the U.S. Energy Information Administration, or EIA, projects production will set new annual records averaging 12.4 million barrels daily in 2023 and 12.8 million in 2024. But that’s still short of the 13.1 million per day high seen in the first week of March 2020 when COVID-19 broke out.

Limiting any optimism of shale overreach are falling numbers for both oil rigs, which are an indicator of future production, and drilled-but-uncompleted wells, or DUCs — whose completion can bring oil faster to the market. Other deterrents are shortages in equipment and workers — two legacies of the pandemic — and fear somewhat of Saudi reprisal: In 2020, the kingdom maxed out production and drove prices to zero after Russia refused to cut output under the OPEC+ pact between them, hastening the demise of most U.S. drillers that might have had a chance of surviving the pandemic.

But if ExxonMobil’s Woods is right, then U.S. oil may be on the cusp of another revolution in production. And it has to do with drilling innovations, including one called shale well refracturing.

To hear energy engineer and researcher Alex Kimani put it, refracturing hasn’t gone mainstream but was quietly producing significant results.

“The technique is seeing higher adoption as drilling technology improves, aging oilfields erode output, and companies try to do more with less,” Kimani said in a post that ran on oilprice.com on Saturday, a day before the latest OPEC+ meeting where Saudi Arabia pledged to cut another million barrels per day in July, bringing its production down to 9 million daily.

Higher drilling efficiency is why U.S. oil production is again heading for annual highs while the rig count has dwindled to 555 from a post-pandemic high of 627 in November 2022 and DUCs fell to 4,863 in April from 4,905 in March.

ExxonMobil (NYSE:XOM) itself is working on two specific areas to improve fracking, CEO Woods says. The first is to “frack more precisely” along the well so that more oil-soaked rock gets drained. The second is to look for ways to keep the fracked cracks open longer so as to boost the flow of oil.

Adds Woods:

“There’s just a lot of oil being left in the ground. Fracking’s been around for a really long time, but the science of fracking is not well understood.”

Nick Dole, an erstwhile commentator on Investing.com’s oil discussion forums, said recently that US oil wells, especially horizontal ones, were being drilled three times deeper now thanks to evolution. He adds:

“When I was a drilling engineer, a well’s max lateral footage was typically about 5,000’, give or take. Now wells are almost all drilled with 10,000’ of wellbore lateral and many are pushing to 15,000’. So, you have effectively drilled 2 wells in a lot less time as the vertical section/rig moves etc time isn’t wasted. So, the ‘productive’ footage is the same with fewer rigs.

That is why U.S. companies are making so much money and can do well in a much lower prices [environment] than when shale well drilling/horizontal with large fracking [was] the normal way to do business. It is … efficiency gain per rig and … fewer are needed.”

Kimani notes that the shale boom was one of the most impressive growth stories ever, from its take-off in 2008 to the Permian stealing the mantle from Saudi Arabia’s Ghawar as the world’s highest producing oilfield in a little over a decade. He alludes to a Reuters estimate that “U.S. petroleum production is at least 10-11 million bpd higher than it would have been without horizontal drilling and hydraulic fracturing.’’

Refracturing particularly helps shale operators return to existing wells and apply a second, high-pressure blast to increase output for a fraction of the cost of finishing a new well.

It is an operation designed to restimulate a well after an initial period of production and can restore well productivity to near original or even higher rates of production as well as extend the productive life of a well.

Says Kimani:

“Refracking can be something of a booster shot for producers — a quick increase in output for a fraction of the cost of developing a new well.”

According to the Journal of Petroleum Technology, new research from the Eagle Ford shale patch in south Texas shows that refractured wells using liners are even capable of outperforming new wells despite the latter benefiting from more modern completion designs.

The Journal also estimates that North Dakota’s Bakken Shale straddles some 400 open-hole wells capable of generating an excess of $2 billion if refractured, based on estimates of just $60 per barrel.

Garrett Fowler, chief operating officer for ResFrac, said a refractured well can be up to 40% cheaper than a new well and double or triple oil flows from aging wells.

The most common refracturing method involves placing a steel liner inside the original well bore, then blasting holes through the steel casing to access the reservoir. The process typically uses half as much steel and frac sand than a new well.

Refracturing particularly would make sense in the current inflationary environment for oil. Back in April, Texas shale producer Callon Petroleum Company (NYSE:CPE) revealed that frac sand, drill pipe, and labor costs have increased drilling and well-completion service costs by about 20% year-on-year.

Callon Petroleum and Hess Corp (NYSE:HES), both of which drill in North Dakota's Bakken shale, have been forced to hike capital spending budgets over the costs with Callon adding $75 million to its original budget while Hess added $200 million to its spending.

Said Stephen Ingram, a regional vice president at hydraulic fracturing firm Halliburton Company (NYSE:HAL):

“Techniques like refracturing will allow the industry to continue to harvest the oil and gas out of these reservoirs.”

Another key benefit of refracturing is that it does not require additional state permits or new negotiations with landowners. It is also less disruptive to the environment because well sites already have road access.

Matt Johnson, CEO of energy consultancy Primary Vision Network, said in a recent article by Reuters:

“Considering inflation, supply chain issues, and rising wages, now is a great time for operators to start looking at wells for refrac opportunities.”

But for all the opportunities, Kimani notes that refracturing remains a fringe technology in U.S. drilling. Norwegian energy consultancy Rystad Energy estimates that out of all the U.S. horizontal well stimulations performed through September, out of the 8,900 total stimulations from January to September, only 200, or a little over 2%, were refractured wells. The vast majority were in the Permian Basin spanning Texas and New Mexico and involved wells drilled before 2018. Rystad also estimates that the count will rise to about 400 refractures by year’s end, or a little over 3% of total completions and comparable to last year’s final tally of 409 refractures.

Justin Mayorga, a senior analyst of shale research for Rystad, told the Journal of Petroleum Technology:

“It’s a very niche market. The companies that are doing it are probably going to continue to do it, but I don’t think refracs are going to explode in numbers next year. I see stable activity that is very similar to this year’s 2–3% of total completions,”

Many U.S. shale producers use refracturing to protect the outcomes on new child wells that share the same pad rather than to boost production from older wells. Despite that, in the Permian Basin alone, tens of thousands of wells are good candidates for refracturing, estimates Alfredo Sanchez, CEO of oil field equipment supplier MorphPackers.

I can cite two other reasons for the snail’s pace in refracturing growth.

The first has to do with money. This is just the sort of technology that if not handled carefully could return the industry to the “Drill Baby, Drill!” ways of the old and sink crude prices again. With shale companies enjoying record profits now, that’s the last thing they want. Also, the Saudis are watching the U.S. industry like hawks and the threat of reprisal from them is greater than ever.

The second is politics. The U.S. oil industry is virtually a sworn enemy of President Joe Biden due to the fossil-unfriendly policies in the early days of his administration. For many in the industry, going gangbusters with production would mean rewarding him politically in the current inflationary environment. That would be too much.

***

Disclaimer: The content of this article is purely to educate and inform and does not, in any way, represent an inducement or recommendation to buy or sell any commodity or its related securities. The author Barani Krishnan does not hold a position in the commodities and securities he writes about. He typically uses a range of views outside his own to bring diversity to his analysis of any market. For neutrality, he sometimes presents contrarian views and market variables.

Latest comments

Risk Disclosure: Trading in financial instruments and/or cryptocurrencies involves high risks including the risk of losing some, or all, of your investment amount, and may not be suitable for all investors. Prices of cryptocurrencies are extremely volatile and may be affected by external factors such as financial, regulatory or political events. Trading on margin increases the financial risks.
Before deciding to trade in financial instrument or cryptocurrencies you should be fully informed of the risks and costs associated with trading the financial markets, carefully consider your investment objectives, level of experience, and risk appetite, and seek professional advice where needed.
Fusion Media would like to remind you that the data contained in this website is not necessarily real-time nor accurate. The data and prices on the website are not necessarily provided by any market or exchange, but may be provided by market makers, and so prices may not be accurate and may differ from the actual price at any given market, meaning prices are indicative and not appropriate for trading purposes. Fusion Media and any provider of the data contained in this website will not accept liability for any loss or damage as a result of your trading, or your reliance on the information contained within this website.
It is prohibited to use, store, reproduce, display, modify, transmit or distribute the data contained in this website without the explicit prior written permission of Fusion Media and/or the data provider. All intellectual property rights are reserved by the providers and/or the exchange providing the data contained in this website.
Fusion Media may be compensated by the advertisers that appear on the website, based on your interaction with the advertisements or advertisers.
© 2007-2024 - Fusion Media Limited. All Rights Reserved.